龙杰产品系列
        红外烤灯
        钣喷线
        打磨房中涂房
        标准喷漆烤漆房
        升降台
        电动平移车
        环保净化设备
        烘干箱
 
联系我们
电话:0515-88537088
传真:0515-88805077
服务热线:13905105867
                  13914676888
E-mail:xusam888@163.com
 
您现在的位置是:龙杰机电  >  产品中心  >  龙杰LJ-H1B三维红外烤灯
 
龙杰LJ-H1B三维红外烤灯
 
简单介绍:特有的专利设计的供电方式,解决了烤灯整体旋转时电线缠绕
咨询热线:139-0510-5867
产品详细内容

· 特有的专利设计的供电方式,解决了烤灯整体旋转时电线缠绕Unique patented design of power supply, avoid tangling and stretching of the electrical wires when rotating the lamp.
· 专利设计的可调阻尼结构行走系统,即使房体纵横梁不水平也可以随意停在任何您所需位置。Patented adjustable damping structure for the traveling system, make it possible to stop at any desired position even if the roof beams are not well leveled.
· 单片机采用工业级美国芯片,工作稳定可靠Microcontroller using U.S. industrial grade chip, stable and reliable
· 气撑杆采用德国STABILUS可控气撑杆 German STABILUS controllable gas spring strut.
· 采用PHILIPS短波红外灯管,寿命8000小时以上,质保二年。功率0-100%可调,时间0-99min可调 PHILIPS shortwave infrared lamp, using life more than 8000 hours, two years warranty. Output power 0-100% adjustable, time 0-99min adjustable.
· 输出灯管可全部工作,也可单根工作. The lamps can work all together, also can separately with one tube to heat.
· H型悬臂设计重量轻,强度高,不变形. H-type cantilever design, light weight, high strength, no deformation
· 特有的灯内反射面设计,使能量利用更加高效Unique design of the light reflecting surface, making energy use more efficient.
· 灯头:铝合金压铸成型端盖和铝拉制侧板,8K全镜面不锈钢反射板,前部镀铬防护网, Lamp holder: die cast aluminum end covers and stretch formed aluminum side panels, 8K mirror type stainless steel reflector plate, front chrome protection grill.
· “井”字轨道设计烤灯可以到达室内每一点 "#" type track design, makes the heat lamp can reach each position inside the room.
· 采用柔性电缆或坦克链供电符合喷烤房防爆要求(非轨道内供电)Using flexible cables or tank chain cables supply the power, meet requirement of explosion-proof for paint spray booth. (non-rail type power supply)
· 独有的便捷的反射面清洁设计(反射面灰尘可导致30%以上的能量损失)The unique design is convenient to clean the reflecting surface. (Dust on reflecting surface can cause energy losses over 30%.)
· 可以随意调整干燥灯的位置,可对除车底盘以外的任何部位进行烘烤The heating lamp can be adjusted to any desired position, it can be used for curing of paint of any position of vehicle (except chassis).
· 人性化设计的锁止结构操作容易轻便,确保灯头既满足各种烘烤角度,又能确保安全. Humanized design locking structure, easy to operate, ensure the lamp holder for different curing angles accurately and safely.
· 符合欧洲CE安全标准 ,通过CE安全认证Meet requirement of European CE safety standards, approved with CE safety certification.

技术参数Technical Parameters:

电压Voltage

220–240V 3 Ph/E

380–40V 3 Ph/PE

频率Frequency

50–60Hz

50–60H

灯管Lamp tube

3根,1.1kw/根, 3 tubes, each 1.1kw

3根,1.1kw/根, 3 tubes, each 1.1kw

电流Current

14A

8A

烘烤面积Curing area

1m*1m

1m*1m

烘烤距离Curing distance

0.3-0.6

0.3-0.6

最高温度Max. temp.

100℃

100℃

烘烤时间Curing time

0-99min

0-99min

功率输出Output style

0-100%无级调整Stepless adjustment

0-100%无级调整Stepless adjustment

输出功率Output power

3.3kW

3.3kW